PCB handling equipment

NG/OK unloader

Product introduction:
PLC control system,Working is stably and reliably;
Easy to operate touch screen control interface;
The pneumatic clamps of top and bottom three point provided for the magazine alignment;
Electric pushing board design can ensure the PCB is unbroken;
Machine always fault monitoring;
The dual track design is small footprint;
Solid and stable design;
SMEMA port is compatible;
 Technical parameters
Function This equipment is used to collect OK and NG PCBs separately after signals of AOI equipment
PCB thickness Min0.6mm
Magazine number Transport up:1pcs,transport down:1ps,(or customized)
Step pitches select 1-4(10mm step pitches)
PCB loading time Approx 6 seconds
Magazine change-over time Approx 30 seconds
Transport direction Left to right/right to left(optional)
Transport height 900±20mm(or customized)
Air pressure 4-6 bar, MAX10L/minute
Power supply 100-230V AC(customized)  single phase,  MAX 300V/A
Model No HR-250NG HR-330NG HR-390NG HR-460NG
PCB size (L×W)~(L×W)mm (50x50)~(350x250) (50x50)~(455x330) (50x50)~(530x390) (50x50)~(530x460)
Machine size (L×W×H)mm 1700×1450×1200 1950×1610×1200 2210×1730×1200 2210×1870×1200
Magazine size(L×W×H)mm 355×320×563 460×400×563 535×460×570 535×530×570
Weight 150kg 180kg 210kg 250kg