PCB Cutting Machine

pcb cutting machine/V-cut PCB separator

Product introduction:
1.The nether linear blade is used to fix the PCB V-cut ,the upper circular blade moves to separ-
ate the PCB. By pressing the foot-pedal to control the action of circular blade.
2.Adopt step motor,can separate all kinds of V-cut PCBs.Max separate length 1200mm (400mm,600mm,900mm,1200mm is optional)
4.The stroke of the upper circular blade can preset .(setting rang :Between any two groups of  0,100 ,200,300,400mm )
5.Blade moving speed can switch between 300mm/s and 500mm/s.
6.The gap between two blades is easy to adjust
7.Operation is very safe, the circular blade is covered by material ,avoid the blade hurting han for free twice.d. Also can install an sensor ,when hand or foreign matter enter into the working area,it will stop immediately.
8.Blade material is SKD-II from Japan,long lifetime.During cutting,it can effectively decrease  cutting stress to
avoid welding spot cracking.
9.Available PCB thickness:0.5-3.2mm
10.PCB V-cut thickness: 0.25-2.0mm
 Functional Specifications
Function HR-3000
Machine size (L×W×H)mm 880*370*420mm
Blade SKD - II material imported from Japan,
Drive system Taiwan bond stepper motor(or customized)
Control system Independent research and development (or customized)
Spindle speed 200mm/s
The tailgate depth adjustable range 0-150mm
The largest PCB cutting width 150mm
The largest PC board cut length 400mm
Cut the PCB thickness 0.5-3.2mm
The thickness of the V groove 0.25-2.0mm
circular blade fine-tuning±0-2mm
nether linear blade  adjustment 0-50mm
Power supply AC220V 50-60HZ
Weight 60Kg